Running Wiring Between WireTracks and WireTracks CM

To run WireTracks and WireTracks CM, follow these steps:

1. Remove the crown molding.
2. Cut an opening into the wall behind the crown molding.
3. Remove the WireTracks channel cover/baseboard assembly.
4. Remove the WireTracks channel or drill a hole in the back of the channel directly below the opening you cut behind the WireTracks CM.
   
5. Drop a weighted fish line from the opening behind the crown molding.
6. Retrieve the line through the hole in the back of the WireTracks channel..
7. Pull a bundle of fish lines from the WireTracks channel to the opening behind the crown molding.
8. Use the fish lines to run any wiring, now and in the future.